PW-120ATXF (120W) Flex ATX Series Power Supply

PC Switching Power Supply
　
Information
　 > This specification describes the requirements of
　 　 switching power supply with a Flex ATX form
　 　 factor, +5V standby voltage, remote on/off. Dual
　 　 line input capability.
　 　 1. Compact 1U height, 40mm cooling fan.
　 　 2. Total Power : 120Watts
　 　 3. Dimension : L125×W82×H41mm
　 > UL, CSA, TUV, CB, FCC, CE

　

Features

　 > High Reliability
　 > 100% BURN-IN Tested
　 > 100% Hi-Pot tested
　 > Safety Approvals, EMC compliance

　

Electrical Specifications

　 > Input range : 95-132/190-264VAC, switch selectable
　 > Frequency : 47 - 63Hz
　 > Input current : 6.5A @115VAC, 3.5A @230VAC
　 > Inrush current : 35A @115VAC, 70A @230VAC cold start at 25°C
　 > Efficiency : >65% @ full load, 115VAC
　 > Maximum power (Po) : 120W
　 > Hold–up time : >16ms min at full load @115VAC
　 > Short circuit protection : All outputs
　 > Over voltage protection : +3.3V / +5V / +12V

　

Safety Standards

　 UL 60950     CSA C22.2 No.60950     TUV EN60950     CB  IEC 60950

　

EMI Standards

　 FCC Class B     CISPR22 Class B     EN 55022 Class B     VCCI      CE

　

DC Output & Features

　
Model No. PW-120ATXF
OUTPUT Min. Max. O/P Regulation Ripple & Noise 
+3.3V 0.5A 3A 5% 70mV
+5V 1A 10A 5% 70mV
+12V 0.5A 5A 5% 150mV
-12V 0A 0.2A 10% 150mV
+5Vsb 0A 1.5A 5% 70mV
PW-OK P.G. : 100ms - 500ms
PS-ON Remote
COM. Return
　

Note : 1. Peak–to–peak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic

　                capacitor.
　            2. PW-120ATXF : +3.3V & +5V Total not exceed 50W ; All outputs power load should not
　                exceed 120W.

　

Mechanical Specification