Version ATX-12V AP Series Power Supply

PC Switching Power Supply
　
Information
　 > Meet AMD K7 and Intel ATX-12V 1.2 and 2.03
　 　 version (Pentium 4 full supported)
　 > Equipped with 6 pin AUX power connector and
　 　 4 pin +12V power connector :
　 　 1. Max. Power : 350Watts
　 　 2. With Active PFC
　 　 3. Dimension: L150×W140×H86mm
　 > UL, CSA, TUV, CB, VCCI, FCC, CE

　

Features

　 > Low ripple & noise
　 > Over load protection
　 > Over voltage protection
　 > 100% Hi-Pot tested & 100% Burn-in
　 > Fan Speed Control
　 > Safety Approvals, EMC compliance

　

With Active PFC

　 > The Power Supply meet the requirements of EN61000-3-2 Class D
　 > Power Factor : >90%

　

Options

　 > Thermal Protection

　

Input

　 > Input voltage : 100-240VAC (Full Range)
　 > Input current (rms) : 10Amp @ 115VAC; 5Amp @ 230VAC
　 > Inrush current : 30A @115VAC, 60A @230VAC cold start at 25°C
　 > Efficiency : >65% typical at full load

　

Safety Standards

　 UL 60950     CSA C22.2 No.60950     TUV EN60950     CB  IEC 60950

　

EMI Standards

　 FCC Class B     CISPR22 Class B     EN 55022 Class B     VCCI Approved     CE

　

DC Output & Features

　
MODEL NO. 　 DC OUTPUT  (LOAD CURRENT) REMARKS
CONTINUOUS +3.3V SENSE/ +3.3V +5V -5V +12V -12V +5Vsb +3.3V & +5V TOTAL
OUTPUT MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. Peak MIN. MAX. MIN. MAX. MAX. OUTPUT
PW-250ATXE-12V-AP 250 WATTS 0.3A 20A 2A 25A 0A 0.3A 1A 13A 16A 0.05A 0.8A 0.05A 2.5A 160 WATTS
PW-300ATXE-12V-AP 300 WATTS 0.3A 28A 2A 30A 0A 0.3A 1A 15A 18A 0.05A 0.8A 0.05A 2.5A 180 WATTS
PW-330ATXE-12V-AP 330 WATTS 0.3A 28A 2A 30A 0A 0.3A 1A 16A 20A 0.05A 0.8A 0.05A 2.5A 200 WATTS
PW-350ATXE-12V-AP 350 WATTS 0.3A 28A 2A 30A 0A 0.3A 1A 16A 20A 0.05A 0.8A 0.05A 2.5A 200 WATTS
　 O/P Regulation 5% 5% 10% 5% 10% 5% 　
　 Ripple & Noise    (Vp-p) 50mV 50mV 50mV 120mV 120mV 50mV 　
　 WIRE COLOR ORANGE/ BROWN RED WHITE YELLOW BLUE PURPLE
　

Note : 1. AP = With Active PFC Function
　            2. Peak–to–peak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic
　                capacitor

　

Mechanical Specification