|
PW-060B-1YXX Series Single Output Open Frame |
|
Open Frame Switching Power Supply |
|
![]() |
||||||||||||||||||||||||
Input
Features
| ¡@ | > | Input range : 90-264VAC |
| ¡@ | > | Frequency : 47 - 63Hz |
| ¡@ | > | Inrush current : <40A peak @ 115VAC; <80A peak @ 230VAC cold start @25¢XC |
| ¡@ | > | Input current : 2A max. (RMS) @ 115VAC |
| ¡@ | > | Efficiency : 80% typical at full load |
¡@
Output
Features
| ¡@ | > | Maximum power : 60W convection cooled |
| ¡@ | > | Hold-up time :10ms at 60 watt load and 115VAC nominal line |
| ¡@ | > | Short circuit protection : Auto recovery |
| ¡@ | > | Over load protection : Over load protected @ 110% to 160% above following maximum rating |
| ¡@ | > | Over voltage protection : Output 110% to 130% above following nominal output. Latching type. |
| ¡@ | ¡@ | AC Recycle. |
¡@
Safety Standards
| ¡@ | UL 60950 CSA C22.2-No.60950 TUV EN60950 CB IEC 60950 |
¡@
EMI Standards
| ¡@ | FCC Part 15 Class B CISPR22 Class B EN 55022 Class B EN 55024 CE |
¡@
DC Output & Features
| ¡@ |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ |
Note : 1. At 25¢XC including initial tolerance, line voltage, currents and output voltages adjusted to |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ | factory settings. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ | 2. Peak¡Vto¡Vpeak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ | capacitor. |
¡@
Mechanical Specification
| ¡@ |
![]() |
¡@
Matching Connectors
| ¡@ | > | CON1 = AC INPUT MOLEX P/N: 09-65-2029 (OR EQUIVALENT) FEMALE HOUSING MOLEX |
| ¡@ | ¡@ | P/N: 09-76-1020 (OR EQUIVALENT) |
| ¡@ | > | CON2 = DC Output MOLEX P/N: 09-65-2048 (OR EQUIVALENT) FEMALE HOUSING MOLEX |
| ¡@ | ¡@ | P/N: 09-52-4044 (OR EQUIVALENT) |