PW-110A-XY Series ATX TYPE Open Frame

Open Frame Switching Power Supply
　
Information
　 > Dimension: L228×W55×H39mm
　 > Output Power : 86-116W
　 > Output Voltage : +3.3~48V
　 > UL, CSA, TUV, CB
　 > ATX Type
　 　 　
　 　 　

Features

　 > Over voltage protection
　 > Low ripple & noise
　 > 100% Burn-in tested
　 > 100% Hi-Pot tested
　 > Fan Speed Control

　

Input Specifications

　 > Input range : 100-120 / 200-240 VAC
　 > Frequency : 47 - 63Hz
　 > Input current : 2.5A max. (RMS) @ 115VAC
　 > Inrush current : <25A peak @ 115VAC; <50A peak @ 230VAC cold start @25°C
　 > Efficiency : >70% typical at full load

　

Output Specifications

　 > Cross regulation : ±5%
　 > Hold–up time : >20ms at full load and 115VAC nominal line
　 > Short circuit protection
　 > Over load protection : Over load protected @ 110% to 145% above following maximum rating
　 > Over voltage protection

　

Safety Standards

　 UL 60950     CSA 22.2-No.60950     TUV EN60950     CB   IEC 60950

　

EMI Standards

　 FCC Class B     CISPR 22 Class B      EN 55022 Class B     CE

　

DC Output & Features

　
MODEL NO. 　 DC OUTPUT  (LOAD CURRENT) 　 　
CONTINUOUS +3.3V +5V -5V +12V -12V +5Vsb Remarks
OUTPUT MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
PW-110A-05Y 106 WATTS --- 1A 10A 0A 0.1A 0.2A 3.5A 0A 0.5A 0A 1.5A W/Fan (22.5CFM)
86 WATTS 6A 0.1A 3.5A 0.5A 1.5A W/O Fan
PW-110A-06Y 116 WATTS 0A 3A 1A 10A 0A 0.1A 0.3A 3.5A 0A 0.5A 0A 1.5A W/Fan (22.5CFM)
96 WATTS 2A 6A 0.1A 3.5A 0.5A 1.5A W/O Fan
　 O/P Regulation 5% 5% 5% 8% 10% 5% 　 　
　

Ripple & Noise

(Vp-p)

 50mV 50mV 50mV 120mV 120mV 50mV
　

Note : At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to

　             factory settings.

　

Mechanical Specification