|
PW-025B-1Y12 Single Output Open Frame |
|
Open Frame Switching Power Supply |
|
![]() |
||||||||||||||||||||||||||||||
Input
Features
| ¡@ | > | Input range : 90-264VAC |
| ¡@ | > | Frequency : 47 - 63Hz |
| ¡@ | > | Inrush current : <20A peak @ 115VAC; <40A peak @ 230VAC cold start @25¢XC |
| ¡@ | > | Input current : 0.65A max. (RMS) @ 115VAC |
| ¡@ | > | Efficiency : 75% typical at full load |
¡@
Output
Features
| ¡@ | > | Maximum power : 25W |
| ¡@ | > | Total regulation : ¡Ó2% |
| ¡@ | > | Hold-up time : >10ms at 25 watt load and 115VAC nominal line |
| ¡@ | > | Short circuit protection |
| ¡@ | > | Over load protection : Over load protected @ 110% to 145% above following maximum rating |
| ¡@ | > | Over voltage protection : +12V output: 12.9 to 13.4VDC |
| ¡@ | ¡@ | above nominal output, |
| ¡@ | ¡@ | latching type. AC Recycle. |
¡@
Safety Standards
| ¡@ | UL 60950 CSA C22.2-No.60950 TUV EN60950 CB IEC 60950 |
¡@
EMI Standards
| ¡@ | FCC Class B CISPR22 Class B EN 55022 Class B CE |
¡@
DC Output & Features
| ¡@ |
|
||||||||||||||||
| ¡@ |
Note : 1. At 25¢XC including initial tolerance, line voltage, currents and output voltages adjusted to |
||||||||||||||||
| ¡@ | factory settings. | ||||||||||||||||
| ¡@ | 2. Peak¡Vto¡Vpeak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic | ||||||||||||||||
| ¡@ | capacitor. | ||||||||||||||||
¡@
Mechanical Specification
| ¡@ |
![]() |
¡@
Matching Connectors
| ¡@ | > | CN1 = AC INPUT (N2), MOLEX P/N: 09-65-2039 (OR EQUIVALENT) FEMALE HOUSING MOLEX |
| ¡@ | ¡@ | P/N: 09-52-4034 (OR EQUIVALENT) |
| ¡@ | > | CN2 = DC OUTPUT, MOLEX P/N: 09-65-2029 (OR EQUIVALENT) FEMALE HOUSING MOLEX |
| ¡@ | ¡@ | P/N: 09-52-4024 (OR EQUIVALENT) |