|
PW-120B-5YATX-DDC ATX Type Converter |
|
ATX DC-DC Converter |
|
![]() |
|||||||||||||||||||||||||||
Input
Specification
| ¡@ | > | 18.0~28.0VDC wide range input |
| ¡@ | > | Ideal for small form factor (SFF) application |
| ¡@ | > | Efficiency : 85% typical at full load |
¡@
Output
Specification
| ¡@ | > | Maximum power : 120W |
| ¡@ | > | DC Outputs Voltage : +3.3V, +5V, +12V, -12V, +5VSB, & PS-ON |
| ¡@ | > | Total regulation : ¡Ó5% |
| ¡@ | > | Short circuit protection : Short circuit protection on all outputs. |
| ¡@ | > | Over load protection : An over load protection will be effected when either of the loadings +5V & |
| ¡@ | ¡@ | +3.3V exceeds +110% to 160%. |
| ¡@ | > | Over voltage protection : 5.6 to 6.5 VDC on +5V output |
| ¡@ | > | With 20 & 4 pin connector on PCB or with wire haress are available |
¡@
DC Output & Features
| ¡@ |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ | Note : Peak¡Vto¡Vpeak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ¡@ | capacitor. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
¡@
Mechanical Specification
| ¡@ |
![]() |
¡@
Matching Connectors
| ¡@ | > | DC INPUT (CN1) SOCKET = Kycon KPJ-4S (OR EQUIVALENT) ; PLUG = Kycon KPP-4P |
| ¡@ | ¡@ | (OR EQUIVALENT) |
| ¡@ | > | DC OUTPUT (CN2) = MOLEX P/N: 39-28-1043 (OR EQUIVALENT) FEMALE HOUSING |
| ¡@ | ¡@ | MOLEX P/N: 39-01-2040 (OR EQUIVALENT) |
| ¡@ | > | DC OUTPUT (CN3) = MOLEX P/N: 39-28-1203 (OR EQUIVALENT) FEMALE HOUSING |
| ¡@ | ¡@ | MOLEX P/N: 39-01-2200 (OR EQUIVALENT) |