PW-080B-6YATX-DDX-Z ATX Type Converter

ATX DC-DC Converter
　
Information
　 > DC Input : 10.8~20V
　 > Total Power : 80W
　 > EFF : 80%
　 > Output : +3.3V, +5V, +12V, -5V, -12V, +5VSB
　 > Model No.: PW-080B-6YATX-DDX -Z
　 　

X= B Type (20P+Wires)                   

　 　 X= C Type (20P Connector on board)
　 　 Z=1: W/O Mounting Holes Dimension: L106×W57×H26mm
　 　

Z=2: W / Mounting Holes Dimension: L126×W57×H26mm

　

Input Specification

　 > 10.8~20.0VDC wide range input
　 > Ideal for small form factor (SFF) application
　 > Efficiency : 80% typical at full load

　

Output Specification

　 > Maximum power : 80W
　 > DC Outputs Voltage : +3.3V, +5V, +12V, -5V, -12V, +5VSB, & PS-ON
　 > Short circuit protection
　 > Over load protection : +5V & +3.3V exceeds +110% to 160%
　 > Over voltage protection : 5.6 to 6.5 VDC on +5V output
　 > DC Outputs cable: 20PIN+B4P+S4P (Option)
　 > With 20pin connector on PCB or with wire haress are available
　 > With extra 4 mounting holes are available

　

DC Output & Features

　
Model No.

PW-080B-6YATX-DDX-Z

 Ripple (Vp-p) Wire Color
OUTPUT Min. Max. O/P Regulation
+3.3V 0A 5A 5% 60mV ORANGE
+5V 0A 5A 5% 60mV RED
+12V 0A 2.5A 5% 120mV YELLOW
-5V 0A 0.2A 10% 60mV WHITE
-12V 0A 0.1A 10% 120mV BLUE
+5Vsb 0A 1A 5% 60mV PURPLE
PW-OK P.G. : 100ms - 500ms GREY
PS-ON Remote GREEN
COM. Return BLACK
　 Note : Peak–to–peak with 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic
　                 capacitor.

　

Mechanical Specification

　 Model No.: PW-080B-6YATX-DDC-1 / PW-080B-6YATX-DDB-1 （W/O MOUNTING HOLES）
　
　 　
　 Model No.: PW-080B-6YATX-DDC-2 / PW-080B-6YATX-DDB-2 （W / MOUNTING HOLES）