|
AD-A2 Series Dual Output Power Adapter |
|
AC/DC Switching Adapter |
|
![]() |
|||||||||||||||||||||||||||
¡@
Features
| ¡@ | > | High Reliability |
| ¡@ | > | 100% BURN-IN Tested |
| ¡@ | > | 100% Hi-Pot tested |
| ¡@ | > | Safety Approvals, EMC compliance |
¡@
Electrical
Specifications
| ¡@ | > | Input range : 90-264VAC(Full Range) |
| ¡@ | > | Frequency : 47 - 63Hz |
| ¡@ | > | Input current (rms) : 2A @ 90VAC; 1A @ 264VAC MAX. |
| ¡@ | > | Efficiency : >75% @ full load, 115VAC(DC Conversion) |
| ¡@ | > | Output Voltage : +5V and +12V Dual outputs |
| ¡@ | > | Voltage regulation : ¡Ó3~5% @ constant voltage mode |
| ¡@ | > | Maximum power (Po) : 27W |
| ¡@ | > | Ripple & Noise : 1% |
| ¡@ | > | Hold¡Vup time : >10ms typical at full load @ 115VAC |
| ¡@ | > | Protection : Over voltage protection, AC recycle ; Short circuit protection, Auto recover |
¡@
Safety Standards
| ¡@ | UL 60950 CSA C22.2-No.60950 TUV EN60950 |
¡@
EMI Standards
| ¡@ | FCC Class B CISPR22 Class B EN 55022 Class B CE(LVD) |
¡@
DC Output & Features
| ¡@ |
|
||||||||||||||||||||||
| ¡@ |
Note : 1. Peak¡Vto¡Vpeak with 20MHz bandwidth with a tantalnm 10uF in parallel with a 0.1uF ceramic |
||||||||||||||||||||||
| ¡@ | capacitor. | ||||||||||||||||||||||
| ¡@ | 2. Z = 0, AC INLET : IEC 320-C8 (2PIN), Z = 1, AC Inlet : IEC 320-C6 (3PIN) | ||||||||||||||||||||||
¡@
Mechanical Specification
| ¡@ |
![]()
|
¡@
Connector
| ¡@ |
|
|||||||||||||||||||||||
| ¡@ |
|
|||||||||||||||||||||||
| ¡@ |
|
|||||||||||||||||||||||
| ¡@ |
|
|||||||||||||||||||||||
| ¡@ |
|
|||||||||||||||||||||||
| ¡@ |
|
|||||||||||||||||||||||