ALL-11P2

Introduction

• The ALL-11P2 supports programming just about every type of device with a programmable memory or configuration including EPROM, EEPROM, FLASH, PLD/CPLD/FPGA, microcontrollers, BPROM, Serial PROM, and much more.
• The ALL-11P2 consists of a universal base and exchangeable PACK options. PACKs range from general purpose universal PACKs to multiple sockets gang programming PACKs.
• The ALL-11P2 includes a high speed CPU and expandable memory buffer to meet programming needs today and into the future. Standard programmer memory is 1Mbit and is expandable in the field to up to 128M bytes. Even with only 1Mbit of memory installed in the programmer a cache system allows much larger EPROM and FLASH to be programmed.
• A high speed serial port interface (up to 115K baud) or high speed parallel port interface ( up to 130K byte/sec ) connects the programmer to any desktop or laptop PC running Windows Windows 95/98/NT. The software interface is a native Windows 95/98/NT application.
• The ALL-11P2 features our new SMD SIMM module pin driver circuits which provide extremely accurate programming waveforms, high speed, high reliability and a compact form factor. ALL-11P2 pin drivers are fully programmable to support programming and testing of standard and low voltage device. The ALL-11P2 is powerful enough for field engineering work.

Features

ALL-11P2 SUPPORTS OVER 5000 IC

• The ALL-11P2 supports an expansive array of EPROM, EEPROM, FLASH, Serial PROM, BPROM, MPU/MCU/DSP, microcontrollers from Atmel, Dallas, Hitachi, Intel, Microchip, Mitsubishi, Motorola, NEC, Philips, TI, Toshiba, WSI, Zilog and others.
• The ALL-11P2 supports PAL, GAL, PEEL, EPLD, EPL, FPGA, CPLD from Altera, AMD, Atmel, Lattice, Lucent Technologies (AT & T), Motorola, TI, Xilinx, etc... The ALL-11P2 can perform functional vector tests on programmable logic devices as fast as 4ns.
• Devices supported range from 8 pins to over 300 pins. Nearly all devices with 8-40 pins can be programmed directly by the ALL11P2's 40 pin DIP socket. Adapters and converters are available to support nearly every type of IC package including PLCC, SOP, TSOP, QFP, TQFP, PGA, SOJ, and much more. Gang programming options are available for E/EPROM, FLASH, Serial PROM, PLD/CPLD, and microcontrollers.

Applications

ALL-11P2 IS EASY TO OPERATE

• The ALL-11P2's new Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Press 'B' to check if the device is blank, press 'P' to program the device, or press 'A' to use the Auto function. The Auto function displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect sectors, etc...). Simply check off the operations you want to perform. After all desired functions are selected the programmer can be operated by a single external key on the programmer.
• The ALL-11P2 can process all popular file formats including Intel HEX, Motorola S-records, binary ,.JEDEC fuse map (.JED), Altera POF, and others. A full screen editor is provided to view or edit any address of the programming buffer in binary, ASCII, or Logic Fuse Map formats.

ALL-11P2 IS RELIABLE

• The ALL-11P2 is a sixth generation universal programmer product. We have over 10 years experience designing universal programmers and we have an installed base of over 120,000 universal programmers. Close relations with all major IC manufacturers keep our engineers well-informed of all the latest programming algorithm releases. Our algorithms have been tested and approved by AMD, Atmel, ICT,Macronix, Motorola, National Semiconductor, WSI and others. Over current protection circuits and reverse insertion detection protect your IC and the ALL-11P2. A self diagnostic test is included to verify correct operation of the hardware and to meet calibration requirements. The ALL-11P2 meets CE requirements and has been approved by TUV. Every ALL-11P2 is backed by a 1 year hardware warranty.

ALL-11P2 BACKED BY WORLDWIDE SERVICE AND SUPPORT

• Over 50 distributors in over 35 countries support the ALL-11P2. New software updates are available by BBS, WEB, or E-mail.
• Over 30 engineers are available to answer technical support questions and add support for new device types. New device support is added weekly to keep up with all of your programming requirements.

Specifications

Electronic Specifications

• Includes high speed CPU and 1Mbit memory buffer as standard.
• A memory card slot accepts SRAM cards to expand the memory buffer from 1Mbit to higher densities up to 128M bytes.( for a serial port used only ) 
• High Speed and compact pin driver circuits to support programming and testing of standard and low voltage IC.High speed serial port interface (up to 115K baud) works on COM1, COM 2, COM3 or COM4.
• High Speed parallel port interface (up TO 130K bytes/sec) work on LPT1, LPT2, LPT3 in ECP or EPP mode.
• Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, File Transfer, Function Configuration, Self Test.

Electrical Requirements

• Operating Voltage : 90 - 245 VAC
• Frequency Range : 47-67 Hz
• Power Consumption : 5V max. 1A
                            12V max. 1.5A

Physical and Environmental Specifications

• Dimensions : 245 mm x 220 mm x 50 mm
• Weight : 2 kg
• Temperature : 0 - 40°C (50 - 105°F)
• Safety Standards : approved by TUV to meet CE requirments

Host System Requirements

• Any IBM or IBM compatible PC with 486, Pentium or higher CPU come with a minimum 32 MB extended memory.
• At least one serial port or one parallel port.
• 5 MB of free hard disk space Windows95/98/NT operating system.
• 3 1/2" floppy disk drive.

ALL-11P(Premium)  
UNIVERSAL AND GANG PROGRAMMER 

The ALL-11P supports programming just about every type of device with a programmable memory or configuration including EPROM, EEPROM, FLASH, PLD/CPLD/FPGA, microcontrollers, BPROM, Serial PROM, and much more.

The ALL-11P consists of a universal base and exchangeable PACK options. PACKs range from general purpose universal PACKs to multiple sockets gang programming PACKs.

The ALL-11P  includes a high speed CPU and expandable memory buffer to meet programming needs today and into the future. Standard programmer memory is 1Mbit and is expandable in the field to up to 16M bytes (128M bits). Even with only 1Mbit of memory installed in the programmer a cache system allows much larger EPROM and FLASH to be programmed.

A high speed serial port interface (up to 115K baud) connects the programmer to any desktop or laptop PC running Windows 3.1 or Windows 95.

The ALL-11P features our new SMD SIMM module pin driver circuits which provide extremely accurate programmingwaveforms, high speed, high reliability and a compact form factor. ALL-11P pin drivers are fully programmable to support programming and testing of standard and low voltage device. The ALL-11P is powerful enough to perform demanding productio tasks and compact enough to use for field engineering work.

ALL-11P SUPPORTS OVER 4500 IC

The ALL-11P supports an expansive array of EPROM, EEPROM, FLASH, Serial PROM, BPROM, MPU/ MCU/ DSP, microcontrollers from Atmel, Dallas, Hitachi, Intel, Microchip, Mitsubishi, Motorola, NEC, Philips, TI, Toshiba, WSI, Zilog and others.

The ALL-11P supports PAL, GAL, PEEL, EPLD, EPL, FPGA, CPLD from Altera, AMD, Atmel, Lattice, Lucent Technologies (AT & T), Motorola, TI, Xilinx, etc... The ALL-11P can perform functional vector tests on programmable logic devices as fast as 4ns.

Devices supported range from 8 pins to over 300 pins. Nearly all devices with 8-40 pins can be programmed directly by the ALL-11P's 40 pin DIP socket. Adapters and converters are available to support nearly every type of IC package including PLCC, SOP, TSOP, QFP, TQFP, PGA, SOJ, and much more. Gang programming options are available for E/EPROM, FLASH, Serial PROM, PLD/CPLD, and microcontrollers.

ALL-11P IS EASY TO OPERATE

The ALL-11P's new Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Press 'B' to check if the device is blank, press 'P' to program the device, or press 'A' to use the Auto function. The Auto function displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect sectors, etc...). Simply check off the operations you want to perform. After all desired functions are selected the programmer can be operated by a single external key on the programmer.

The ALL-11P can process all popular file formats including Intel HEX, Motorola S-records, binary ,.JEDEC fuse map (.JED), Altera POF, and others. A full screen editor is provided to view or edit any address of the programming buffer in binary, ASCII, or Logic Fuse Map formats.

Electronic Specifications

• Includes high speed CPU and 1Mbit memory buffer as standard.
• A memory card slot accepts SRAM cards to expand the memory buffer from 1Mbit to higher densities up to 128M bytes.
• High Speed and compact pin driver circuits to support programming and testing of standard and low voltage IC. High speed serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or COM4).

Function Specifications

Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, File Transfer, Function Configuration, Self Test.

Electrical Requirements

Operating Voltage   : 90 - 245 VAC
Frequency Range    : 47-67 Hz
Power Consumption : 5V max 1A 12V max 1.5A

Physical and Environmental Specifications

Dimensions   : 245 mm X 220 mm x 50 mm
Weight           : 2kg
Temperature : 0 - 40 C (50 - 105 F)
Safety Standards: approved by TUV to meet CE requirments

Host System Requirements

• Any IBM or compatible 486/Pentium with a minimum 4MB extended memory.
• 5 MB of free hard disk space Windows 3.1/3.11/95 operating system
• 3 1/2" floppy disk drive

ALL-GANG-08P2

Introduction

THE ALL-GANG-08P2 IS VERSATILE
The ALL-GANG-08P2 can support programming up to 8 EPROM, EEPROM FLASH, microcontrollers, GAL, Serial PROM, DSP, and other device types. The ALL-GANG-08P2 has room for up to 8 interchangeable sockets. When you need to change to a new device family or package you simply change the sockets, not the whole programmer. Support is provided for all of the latest package styles including DIP, PLCC, SOP/SOIC, TSOP, SSOP, QFP, TQFP, MQFP, and others. We designed the system so customers pay only for the support needed. The expense and overhead of concurrent programming systems and device dedicated gang programmers is eliminated. The ALL-GANG-08P2 includes a high speed CPU and an expandable memory buffer to meet programming needs today and into the future. Standard programmer memory is 1Mbit and is expandable to up to 128M bytes. Even with only the standard 1Mbit of memory installed in the programmer a cache system allows much larger EPROM and FLASH to be programmed at high speeds. A high speed serial port interface ( up to 115K baud ) or high speed parallel port interface (up to 130K bytes/sec) connects the programmer to any desktop or laptop PC running Windows 95/98/NT. The software interface is a native Windows 95/98/NT application.

Features

The ALL-GANG-08P2 is not just a dedicated EPROM/FLASH programmer. It can be expanded to support microcontrollers, Serial PROM, WSI PSD peripherals, 16V8/20V8/22V10 and other PLD/GAL devices, and much more by using our interchangeable socket heads. The ALL-GANG-08P2 and its socket heads let you support devices in nearly any package and devices with nearly any pin count.

Applications

ALL-GANG-08P2 IS EASY TO OPERATE

• The ALL-GANG-08P2's new Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Click on the ''Blank Check'' button to check if the device is blank, click the'' Program'' button to program the device, or click the'' Auto'' button to use the Auto function. The Auto functions displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect/ unprotect sectors, etc...) Simply check off the operations you want to perform. After all desired operations are selected the programmer can be operated by a single external key on the programmer to initiate the operations. LED's next to each socket indicate that all operations were performed OK on the given device.

ALL-GANG-08P2 IS RELIABLE

• We have over 10 years of experience designing gang programming systems for production environments. We have an installed base of over 20,000 gang programmers worldwide in use at some of the largest and most respected companies in the computer and embedded systems industry. Close relations with all major IC manufacturers keep our engineers well informed of all of the latest programming algorithm releases. Our company's programming algorithms have been tested and approved by leading IC manufacturers worldwide. Our dedicated high speed CPU and our new surface mount SIMM module pin driver circuits combine to provide extremely accurate programming waveforms, high speed, high reliability, and a compact form factor compared to traditional gang programmers. The ALL-GANG-08P2 pin drivers are fully programmable to support programming and testing of standard and low voltage devices. Built in protection circuits guard against over current and reverse insertion errors. The ALL-GANG-08P2 meets CE requirements and is approved by TUV. Every ALL-GANG-08P2 is backed by a 1 year hardware warranty.

ALL-GANG-08P2 BACKED BY WORLDWIDE SERVICE AND SUPPORT

• Over 50 distributors in over 35 countries support the ALL-GANG-08P2. New software updates are available by BBS, Web, or E-mail. Over 30 engineers are available to answer all technical questions and to add support for new device types. New device is added weekly to the supported list to keep up with all of your programming requirements.

Specifications

Electronic Specifications

• Includes high speed CPU and 1Mbit memory buffer as standard.
• A memory card slot accepts SRAM cards to expand the memory buffer from 1Mbit to higher densities up to 128M bytes.
• High Speed and compact pin driver circuits to support programming and testing of standard and low voltage IC.High speed serial port interface (up to 115K baud) works on COM1, COM2, COM3 or COM4.
• High Speed parallel port interface (up TO 130K bytes/sec) work on LPT1, LPT2, LPT3 in ECP or EPP mode.

Function Specifications

• Load File, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, File Transfer, Function Configuration, Self Test.

Electrical Requirements

• Operating Voltage: 90 - 245 VAC
• Frequency Range : 47-67 Hz
• Power Consumption: 5V max. 1A
                           12V max. 1.5A

Physical and Environmental Specifications

• Dimensions : 245 mm x 220 mm x 55 mm
• Weight : 2.5kg
• Temperature : 0 - 40°C (50 - 105°F)
• Safety Standards : approved by TUV to meet CE requirments

Host System Requirenents

• Any IBM or IBM compatible PC with 486, Pentium or higher CPU come with a minimum 4MB extended memory.
• At least one serial port or one parallel port .
• 32 MB of free hard disk space Windows 95/98/NT operating system.
• 3 1/2" floppy disk drive .

version ALL-GANG-08  UNIVERSAL GANG  PROGRAMMER

THE GANG-08 IS VERSATILE

The GANG-08 can support programming up to 8 EPROM, EEPROM FLASH, microcontrollers, GAL, Serial PROM, DSP, and other device types. The GANG-08 has room for up to 8 inter- changeable sockets. When you need to change to a new device family or package you simply change the sockets, not the whole programmer. Support is provided for all of the latest package styles including DIP, PLCC, SOP/SOIC, TSOP, SSOP, QFP, TQFP, MQFP, and others. We designed the system so customers pay only for the support needed. The expense and overhead of concurrent programming systems and device dedicated gang programmers is eliminated.

The GANG-08 includes a high speed CPU and an expandable memory buffer to meet programming needs today and into the future. Standard programmer memory is 1Mbit and is expandable to up to 128M bytes. Even with only the standard 1Mbit of memory installed in the programmer a cache system allows much larger EPROM and FLASH to be programmed at high speeds.

A high speed serial port interface (up to 115K baud) connects the programmer to any desktop or laptop PC running Windows 95 or 3.1.

MAXIMIZE YOUR INVESTMENT

The GANG-08 is not just a dedicated EPROM/FLASH programmer. It can be expanded to support microcontrollers, Serial PROM, WSI PSD peripherals, 16V8/20V8/22V10 and other PLD/GAL devices, and much more by using our interchangeable socket heads. The GANG-08's socket heads let you support devices in nearly any package and devices with nearly any pin count.

GANG-08 IS EASY TO OPERATE

The GANG-08's new Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Click on the "Blank Check" button to check if the device is blank, click the "Program" button to program the device, or click the "Auto" button to use the Auto function. The Auto functions displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect/unprotect sectors, etc...) Simply check off the operations you want to perform. After all desired operations are selected the programmer can be operated by a single external key on the programmer to initiate the operations. LED's next to each socket indicate that all operations were performed OK on the given device.

Electronic Specifications

• Includes high speed CPU and 1Mbit memory buffer as standard.
• A memory card slot accepts SRAM cards to expand the memory buffer from 1Mbit to higher densities up to 128M bytes.
• High Speed and compact pin driver circuits to support programming and testing of standard and low voltage IC. High speed serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or COM4).

Function Specifications

Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, File Transfer, Function Configuration, Self Test.

Electrical Requirements

Operating Voltage   : 90 - 245 VAC
Frequency Range     : 47-67 Hz
Power Consumption: 5V max 1A 12V max 1.5A

Physical and Environmental Specifications

Dimensions   : 245 mm X 220 mm x 50 mm
Weight           : 2kg
Temperature : 0 - 40 C (50 - 105 C)
Safety Standards: approved by TUV to meet CE requirments

Host System Requirements

• Any IBM or compatible 486/Pentium with a minimum 4MB extended memory.
• 5 MB of free hard disk space Windows 3.1/3.11/95 operating system
• 3 1/2" floppy disk drive